Bench Top Power Supply Семейство C/V current & voltage programmable DIN-Rail Laboratory Power Supply
The HSEuireg series is designed for automatic test bench and scalable power in a parallel operation mode
We recommend the use of an external controller (SPC or PC interface card)
The device features constant voltage and constant current mode
The HSEuireg design is made for complex loads. It can be used as a charger rectifier with an external O-ring diode
The available power range is 480 W, 720 W and 1000 W
The product line features a multifunctional selectable analogue interface 0-5 V/0-10 V/0-20 mA/4-20 mA via DIP-Switch
Real-time monitoring of current and voltage, sensing, remote shutdown, Aux-voltage for external potentiometer programming, power good relay and a built in electronic AC inrush current limiter
The analogue PWM control circuit allows very quick response on load changes, a quick rise time and a small voltage ripple
To allow a quick down programming, an internal power-sink is available as an option
An USB2.0 digital interface with galvanic separation 500 Vdc is available as an option. It includes a full license of the MCD Test Manager Light software and offers a DCOM driver that basically uses .NET Framework. The open source DCOM driver allows easy bound into the LabView, WinLab, MCD Testmanager, Office and Open Office applications und MS-XP or WIN7
The HSEuireg product line features natural cooling with 480 W and 720 W and a controlled fan with 1000 W Технические параметры
- Alternative (Alias): 304.1083.002CA
- Continuity Check: Yes
- Display Type: LED
- Input Voltage Max.: 265V
- Input Voltage Min.: 90V
- Manufacturer: Camtec
- Operating Temperature Max.: 60°C
- Operating Temperature Min.: -25°C
- Output Current 1 Max.: 24A
- Output Current 2: -888
- Output Power: 480W
- Output Type 1: Programmable
- Output Voltage 1 Max.: 30V
- Outputs: 1
- Response Time: 1ms
- Ripple & Noise (V): 40mV
- Series: HSEUIreg Series
- Standards Met: cUL60950 EN60950-1 EN60204-1
- Warranty: 2y
