Список комплектующих, который есть на нашем складе в Санкт-Петербурге и доступен для заказа.
Подробнее

КаталогАвтоматикаМеханические приводыТрансмиссииРеменные передачи10AT3/150

10AT3/150, Belt 150 mm, Synchroflex

Арт: 154-66-008
10AT3/150, Belt 150 mm, Synchroflex
  • Склад:
    Изображение товара дано только в качестве иллюстрации. См. спецификацию продукта (pdf)
    Заказать Цены указаны без НДС

    Belt Семейство Synchronous belts and wheels AT3
    Cast synchronous belts with suitable wheels. Large belt volume in relation to belt height combined with steel reinforcement gives increased force transmission capacity. The reinforcement also contributes to greater division accuracy which makes series AT especially suitable for positioning operation. The combination of synchronous belt and wheel with a close tooth gap gives gap free and safe function. Wheels are available in 2 models, with and without end pieces. Wheels with end pieces are used to guide the synchronous belt sideways. However, a rule of thumb is that you should use as few wheels with an end piece as possible in synchronous belt operation. The wheels need to be processed (drilling and threading) if a stop screw will be used for fastening. Технические параметры
    • Длина: 150 мм
    • Ширина: 10 мм
    • Описание: Synchronous belt 10AT3/150
    • Число зубьев: 50
    • Температура, мин.: -30 °C
    • Температура, макс.: +80 °C
    • Температурный диапазон: -30...+80 °C