Wheel Семейство Synchronous belts and wheels AT3
Cast synchronous belts with suitable wheels. Large belt volume in relation to belt height combined with steel reinforcement gives increased force transmission capacity. The reinforcement also contributes to greater division accuracy which makes series AT especially suitable for positioning operation. The combination of synchronous belt and wheel with a close tooth gap gives gap free and safe function. Wheels are available in 2 models, with and without end pieces. Wheels with end pieces are used to guide the synchronous belt sideways. However, a rule of thumb is that you should use as few wheels with an end piece as possible in synchronous belt operation. The wheels need to be processed (drilling and threading) if a stop screw will be used for fastening. Технические параметры
- Описание: Timing pulley 21AT3/45-0
- Отверстие: 6 мм
- Число зубьев: 45
- Температура, мин.: -30 °C
- Температура, макс.: +80 °C
- Температурный диапазон: -30...+80 °C
- Внешний диаметр: 42.56 мм